Image Recall Mode - Konica Minolta Di5510 User Manual

Network Function

Image Recall Mode

Use this function to recall the image data from the HDD/PC to the built-in DIMM for
printing.
NOTE: Installation of the optional HDD (HDD-2) is required to recall data from HDD.
To recall data stored in the HDD/PC, enter the password specified at the time data was
stored, then designate it by the job name.
Scanner/Server Setting Menu Screen
1 Press [Mode] to light up the [Scan] LED.
The Scan/Server Setting Menu Screen will
be displayed.
2 Touch IMAGE RECALL to display the
Image Data Password Entry Screen.
3 Enter your Image data password from the
touch screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct password.
4 If the password is correct, touch OK to display the Recall Job Selection Screen.
5 Touch the desired job name key to highlight it, then touch B to move it to the recall list on
the right side.
NOTES: • To cancel the job moved to the recall list, touch the job name in the list to highlight it, then touch A
to return it to the left side key.
• Touch JOB CHECK to display the Mode Check Screen to view all the feature selections made for
the job moved and highlighted in the recall list on the right side.
11-10
Image Data Password Entry Screen
Recall Job Selection Screen