Applications
Non-Image Area Erase (continued)
Application Selection Screen
1 Touch APPLI. on the Basic Screen to display the Application Selection Screen.
2 Touch Non-image Area Erase .
3 Select additional copying features, as desired.
4 Touch OK to complete the setting and return to the Basic Screen.
5 Enter print quantity.
6 Position original(s) FACE DOWN on the platen glass.
IMPORTANT: KEEP THE EDH OPEN THROUGHOUT THE PROCEDURE.
When using Platen store mode, see p. 6-35 to p. 6-36.
Option: Press [Mode Check] to view the selection, and make a Proof copy, if desired. Touch EXIT to return to
the Basic Screen. See p. 6-43 to p. 6-45.
7 Press [ Start ].
After copying is completed, touch Non-image Area Erase on the Application Selection
Screen or press [ Panel Reset ] to release the mode and reset the machine.
9-24
Set original
General copying
Non-Image Area Erase