Konica Minolta Di5510 User Manual page 208

Applications
Book Copy (continued)
1 Load 8.5"x11" sheets in a tray or in the Multi-sheet bypass tray.
2 Touch APPLI. on the Basic Screen to display the Application Selection Screen.
3 Touch Book Copy to enter the Book Copy Screen.
4 Touch Full scan , Front cover + Full scan , or Front/Back cover + Full scan , as required.
Touch REVERSE THE SIDE OF OPEN PAGE to change the binding mode according to
the original.
Option: Touch Booklet on the Book Copy Screen to use this function.
5 Touch OK to return to the Application Selection Screen.
6 Make additional application selections, or touch OK to return to the Basic Screen. The
Store mode is automatically selected.
7 Select the copy mode (1-1 or 1-2).
8 Enter the desired print quantity.
9 Position the open book or sheet on the platen glass in the left rear corner, aligning the
edge with the left measuring guide. When opening the EDH, Non-Image Area Erase and
AUTO Layout are automatically selected.
IMPORTANT: KEEP THE EDH OPEN THROUGHOUT THE SCANNING PROCEDURE OF
THE PLATEN STORE MODE.
If Full scan is selected and the originals can be loaded in the EDH, EDH store mode is
also available. If desired, position originals into the EDH.
Option: Press [Mode Check] to view the selection and make a Proof copy. Touch EXIT to return to the Basic
Screen. See p. 6-43 to p. 6-45.
10 Press [ Start ] to start scanning.
11 Remove the first original(s). Repeat the procedure for subsequent originals, pressing
[ Start ] for each original.
When Front cover + Full scan or Front/Back cover + Full scan is selected, only the
front and back covers are required to be scanned from the platen glass. If you want to
use EDH store mode for scanning the rest of the originals, close the EDH and position
originals, then press [ Start ].
12 Touch STORE to deselect the store mode, then press [ Start ] to print.
After copying is completed, touch Book copy on the Application Selection Screen or
press [ Panel Reset] to release the mode and reset the machine.
9-20