Group Mode Using Primary (Main) Tray - Konica Minolta Di5510 User Manual

Output Modes
Output Mode for Machine with Finisher (continued)

Group Mode Using Primary (Main) Tray

Use this mode when you want to group together multiple copies of each original, and offset
the sets upon exit. Grouped sets cannot be stapled.
❒ Paper size:11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R
❒ Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
Basic Screen
Output Mode popup menu
1 Touch OUTPUT APPLI. on the Basic Screen to display the Output Mode popup menu.
2 Touch GROUP , then OK to complete the setting and return to the Basic Screen.
The GROUP icon will be displayed in the OUTPUT icon area.
3 Enter the desired print quantity.
4 Position originals in the EDH, and make copying selections as required.
When using Store mode, see p. 6-35 to p. 6-37.
5 Press [ Start ].
CAUTION:
When the selected print quantity exceeds the Finisher's maximum capacity, remove the printed sheets
while paper is exiting to avoid paper mishandling.
3,000 sheets 8.5"x11"R, 8.5"x11" (FN-121/FN-115)
2,500 sheets 8.5"x11"R, 8.5"x11" (FN-10)
1,500 sheets 11"x17", 8.5"x14"
2
3
3
2
1
1
30mm
7-9