Introduction Of Fax Transmission Function; Introduction Of Fax Receiving Function - Konica Minolta bizhub c3110 Quick Start Manual

6
5
Press the Start key.
% If you press the Stop/Reset key while scanning the original, scan processing stops, and the confir-
mation screen appears to check whether you wish to cancel the job. To stop sending, cancel the
job.
Sending starts.
6.3.3

Introduction of fax transmission function

This section describes convenient fax transmission functions. For details on how to use each function, refer
to Chapter 4 "Sending Options" in [User's Guide: Fax Functions].
Function
Timer TX
Check Dest. & Send
F-Code TX
Quick Memory TX
Polling TX
6.3.4

Introduction of fax receiving function

This section describes the convenient fax receiving functions. For details on how to use each function, refer
to Chapter 6 "Receiving Options" in [User's Guide: Fax Functions].
Function
Forward TX
Memory RX
Polling RX
PC-Fax RX
Night RX
6-12
Overview
Timer TX automatically starts sending at a specified time if the time is pre-
specified.
Check Dest. & Send checks the fax number specified for the fax transmission
against the destination fax number (CSI) and sends the fax only when they
match.
F-Code TX specifies the F code (SUB address and sending ID) to send a fax.
Confidential communication and relay distribution request are available.
• The confidential communication function is designed to communicate with
specific people using a Confidential RX User Box that requires a registered
number and a password.
• Relay distribution request is a function that the relay station, which has re-
ceived a fax, distributes the received fax to a pre-registered group.
Fax transmission starts concurrently with scanning one page. The total num-
ber of pages transmitted can be entered in the sender record.
Polling TX stores a file beforehand on the internal hard disk and sends it out
upon a request for reception (polling request) from the recipient.
Overview
Forward TX is a function that transfers a received fax to a pre-specified desti-
nation (fax or E-mail destination).
Memory RX saves a received fax in this machine's memory without printing it.
You can check the contents of the received fax and print out only the required
one.
Polling RX receives a polling file saved in a sending machine as instructed from
this machine.
PC-Fax RX saves the received fax in memory. The saved fax can be printed or
downloaded if necessary.
Night RX prohibits printing of faxes received in the pre-specified nighttime
zone.
Using Fax Functions 6.3
[Quick Start Guide]