5
To set the "Auto Reset" function
This function is used to specify the length of time after the last operation until all
functions automatically return to their default settings. (The default setting is
[1 min.].)
For details on the automatic reset, refer to "Original Documents/Feeding the
Document" in the Basic Operations volume.
1
Press the [UTILITY] key.
2
Touch [User's Choice: 1].
3
Touch [2/2].
4
Touch [Auto Reset].
5
Press the [C] (CLEAR
QTY.) key. The current
setting is erased.
6
Using the keypad, enter
the desired length of
time (between 1 and 9
minutes).
❍
If you do not wish
for the copier to
automatically reset
its modes and
functions, touch
[No].
7
Touch [Enter].
8
Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears.
5-16
5.2 Specifying Default Settings ("User's Choice" Functions)
Konica 8020/8031