Control Panel Layout - Konica Minolta bizhub PRESS 1250 User Manual

2.1 Machine Configuration
2.1.3

Control Panel Layout

No. Name
1 Keypad
2 Reset
3 Power LED
4 Data LED
5 Interrupt
6 Stop
7 Proof Copy
8 Start
9 Start LED
10 C (Clear)
11 Access
bizhub PRESS 1250/1052
Description
Enters numeric values.
Restores the machine to the initial settings.
Lights up in red when the main power switch is
turned on, then turns green when the sub power
switch is turned on.
Flashes while the machine is receiving print data.
Stops copying/printing/scanning in progress to allow
another copying job of settings newly specified.
Suspends the current output job or stops the machine
operation.
Used to print a single set or the first page to verify the
copy settings.
Activates various machine operations.
Lights up in blue when the machine is ready to oper-
ate.
It turns orange when any operation cannot be started.
Allows change in entered numeric value.
Used to enter a user/account password to gain us-
er/account authentication. Also sets the machine to
allow the operation only when the next user is authen-
ticated, if user authentication or account track func-
tion is activated and an authenticated user has used
the machine.
2
2-6