Table of Contents
Advertisement
Refill the conditioning liquid in the paper module container
Refill the conditioning liquid in the paper module container
To keep the relative humidity optimal, the paper module needs conditioning liquid. There are
paper modules with containers to supply conditioning liquid and paper modules with an internal
system to supply conditioning liquid. This topic describes the maintenance action to refill the
paper module container.
The dashboard indicates when the climate control in the paper module needs attention. (
levels of supplies and waste on page
Climate measurements in the paper module deviate from the configured relative hu-
midity. Check if you need to refill the conditioning liquid.
For conditioning liquid use demineralized water.
[440] Location of the paper module
Before you begin
Take a container with demineralized water and place the container at the rear of the paper
module.
Procedure
Action
1
1. Push and hold the blue ring of the connector.
2. Pull out the air supply tube.
350
Chapter 13 - Maintain the printer
NOTE
You may notice that air escapes from
the supply tube, which is normal.
443)
Filling
2
1
4
Advertisement
Table of Contents
