7197 Owner's Guide
Hardware Options
Print Density
This function makes it possible to adjust the energy level of the print headto darken the
printout. An adjustment should only be made when necessary. The factory setting is 100%.
Warning: Choose an energy level no higher than necessary to achieve a dark printout.
Failure to observe this rule may result in a printer service call or voiding of the printer
warranty. Consult your NCR technical support specialist if you have any questions.
Press the Paper Feed Button for the print density you want.
** SET PRINT DENSITY ?
YES
NO
100 %*
110 %
120 %
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
Maximum Power Option
This function allows the user to set the maximum power for the printer to 75W or 55W.
Press the Paper Feed Button for the option you want.
** SET MAX POWER OPTION ?
YES
NO
55W Power Supply*
75W Power Supply
Note: Press the Paper Feed Button for at least one second to validate the selection.
-> Long Click
-> Short Click
-> 1 Click
-> 2 Clicks
-> 3 Clicks
-> Long Click
-> Short Click
-> Long Click
-> Short Click
March 2002
Chapter 4: Diagnostics
56