Table of Contents
Advertisement
5
Maintenance
Cleaning tasks
Cleaning materials
Replacement parts
A-61096 June 1999
To keep your scanner/microimager in good operating condition, the
following tasks should be performed:
•
Cleaning the imaging guides (daily)
•
Cleaning the Document Scanning Array (daily)
•
Cleaning the feed and separator rollers (daily)
•
Cleaning the paper path (daily)
•
Vacuuming inside the scanner/microimager (daily)
•
Cleaning the exposure lamp housings (weekly)
•
Cleaning the mirrors (weekly)
•
Cleaning the cabinet (weekly)
•
Cleaning the film cassette(s) (monthly)
•
Cleaning the air filter (monthly)
For additional maintenance and feeder adjustment information, see
Kodak publication A-61604. This publication is part of the
Maintenance and Feeder Adjustment procedure video, catalog number
828 5306.
Materials needed to perform all maintenance procedures are:
•
A mild cleaning agent
•
A quality lens cleaner
•
A soft, clean, lint-free cloth
•
A soft-bristled cleaning brush
•
A vacuum cleaner
•
Staticide Wipes
•
Roller Cleaning Pads
•
Paper Path Cleaner
IMPORTANT: Do not use any unauthorized commercial cleaning
solvent in any of the cleaning procedures.
Consumable parts that can be replaced by the customer include:
•
Air filter
•
Film cassette battery
•
DSA lamps
•
Exposure lamps
•
Imaging guides
Instructions on how to replace these parts are included later in this
chapter.
5-1
Advertisement
Table of Contents
