The Delay Effect - Access VIRUS CLASSIC User Manual

Locate the parameter group CHORUS in the EFFECTS menu.
MENU
DISPLAY
CHORUS DIR/EFF determines the balance between the original signal and the processed signal.
The parameters RATE and SHAPE control another LFO that was installed specifically for the chorus
LFO. DELAY is used to set the delay time, DEPTH determines the modulation intensity, and FEED-
BACK controls the feedback level. When you want to generate a flanger effect, the FEEDBACK
parameter's negative control range lets you dial in softer characteristics for the flanger. Please keep
in mind that the Chorus section in the Virus is fully stereophonic: Stereo positions as well as pano-
rama modulations and stereo spread values that you have dialed in elsewhere remain intact in the
effects signal.

The Delay Effect

A delay effect is traditionally used to generated an echo of the input signal. Locate the parameter
group DELAY in the EFFECTS menu.
MENU
DISPLAY
Here you fill find parameters that are virtually identical to the parameters of the CHORUS group. Do
not allow yourself to be confused by the slightly different terminology: The delay time is set via the
parameter entitled TIME (equivalent to DELAY in the CHORUS section); the other features are
FEEDBACK with a dedicated LFO and the familiar parameters RATE, DEPTH and SHAPE.
EFFECTS > CHORUS > DIR/EFFECT LEVEL
01111111111111111112
1 CHORUS
Dir/Eff
61111111111111111154
EFFECTS > DELAY > EFFECT SEND
01111111111111111112
1 DELAY
EffectSend
61111111111111111154
OFF≤
0≤
VIRUS CLASSIC MANUAL
Introduction
39