Volume And Panorama Position - Access VIRUS CLASSIC User Manual

Volume and Panorama Position

You probably noticed that the many of the sound shaping options available in the Virus occasionally
influence the volume level. For instance, an unfiltered sawtooth is naturally louder than a highly fil-
tered sawtooth because whenever you blend a part of the frequency spectrum out of the mix, you
are automatically reducing the overall volume of the signal. This is why the Virus is equipped with a
programmable volume pot for each SINGLE PROGRAM. It enables you to balance out the volume
levels of your sound programs.
Locate the parameter PATCH VOLUME in the COMMON section of the EDIT menu.
MENU
DISPLAY
Its value is set to 100 so that you have a reserve or headroom of 27 volume increments when you
are dealing with highly filtered sounds.
You have already dealt with the Panorama position as a modulation target of LFO 2. Here you can
not only modulate it, but also determine settings manually. For this purpose, use the parameter
PANORAMA which is also located in the OUTPUT section of the EDIT menu. Like many other
parameters, Panorama is a starting point for modulations. For instance you can modulate the Pano-
rama position via LFO 2 even if you have already set the Panorama to the far left position. In this
case of course you will only hear the Panorama position shift to the right.
36
EDIT > COMMON > PATCH VOLUME
01111111111111111112
1 COMMON
PatchVolume 100≤
61111111111111111154