Multi Mode Parameters - Access VIRUS CLASSIC User Manual

SOFT KNOB 1 MIDI
This is where you enter the MIDI Controller assignment for the SOFT KNOB 1 knob. The Controller
is routed via MIDI Out for the purpose of controlling a connected MIDI device. The entry is only
active when SOFT KNOB 1 MODE is set to MIDI.
SOFT KNOB 2 MODE, SOFT KNOB 2 SINGLE, SOFT KNOB 2
GLOBAL, SOFT KNOB 2 MIDI
Same as SOFT KNOB 1; see paragraph above.
The following parameters featured in the CONFIG menu are described in greater detail below in the
section Global Parameters / Midi Parameters / System Parameters. These operate globally and are
accessible in the CONFIG menu at any time irrespective of the given operating mode.

Multi Mode Parameters

Please bear in mind the PART- and/or MULTI-related parameters described in the following
are available in MULTI mode only.
SELECT BANK
Activates the bank for a SINGLE PROGRAM for the current PART.
SELECT NUMBER
Activates a SINGLE PROGRAM for the current PART.
PART TRANSPOSE
Transposes the PART in semitone steps.
102