Classes - Access VIRUS CLASSIC User Manual

NO REF NAME
Part State Bitfield:
Bit 0 Part Enable
Bit 1 Part Midi Volume
Enable
Bit 2 Part Hold Pedal Enable
Bit 3 Keyb To Midi
Bit 4 Internal
Bit 5 Note Steal Priority
Bit 6 Part Prog Change
Enable
All bytes are shown in decimal representation.

Classes

P: PERFORMANCE CONTROLLER
Accessible by Control message. Performance Controllers are not stored with a Single-Sound. If
more than one Multi Part is set to the same MIDI channel, all Parts on this MIDI channel receive the
same Performance Controllers.
A: SOUND PARAMETER OF BANK A
Accessible by Control message, SysEx-Parameterchange and Single-Dump.The Sound Parameters
are stored with a Single Sound. When received as Control Message, the Sound Parameter is
received only by the Multi Part with the lowest part number, if more than one Multi Part is set to the
same MIDI channel. When received as SysEx-Parameterchange or Single-Dump, the part is
addressed by the part number irrespective of the actual MIDI channel setting.
RANGE VALUE TEXT
0:Off 1:On
0:Off 1:On
0:Off 1:On
0:Off 1:On
0:Low 1:High
0:Off 1:On
VIRUS CLASSIC MANUAL
Appendix
371