Lfo 2 - Panel - Access VIRUS CLASSIC User Manual

purposely placed the modulation point in front of the filter section in the signal chain. This means
that the distortion amount – i.e. the intensity of the effect – is also modulated when you activate
SATURATION. Furthermore, you can use fast LFO oscillations to generate brief impulses (transients)
in the oscillator signal that excite the resonant frequencies of the filters. The filters will fade out
freely since their output signal is not affected by the FILT GAIN volume modulation.

LFO 2 - Panel

RATE, SHAPE, ENV MODE
Same as LFO 1
AMOUNT
This button does not actually control a parameter, it opens a local menu. This menu contains inde-
pendent modulation intensities for controlling the following parameters via LFO 2:
Parameter Description
SHAPE 1+2
The SHAPE parameters of both oscillator jointly
FILTER -1
The frequency of the first filter
FILTER -2
The frequency of the second filter
PAN
Panorama position
ASSIGN (DEST)
A freely selectable sound parameter for LFO modulation
ASSIGN (AMOUNT)
Modulation intensity for the freely selected sound parameter
While you are dealing with one of the parameters discussed here, the corresponding LED will flash.
If this parameter is assigned a value other than 0, the LED will illuminate continuously when you exit
the menu.
VIRUS CLASSIC MANUAL
The Parameters
69