Soft Knob Modes - Access VIRUS CLASSIC User Manual

Soft Knob Modes

Mode Description
GLOBAL
The knob controls the parameter that you have set to Global in the SOFT
KNOB menu regardless of what the other settings and the selected SIN-
GLE program may be.
SINGLE
The knob controls the parameter that you have set to Single in the SOFT
KNOB menu. The setting for this parameter is stored in the SINGLE pro-
gram and called up whenever you select this program. If, however, you
have not selected a parameter for this program (SOFT KNOB Single =
OFF), the setting for SOFT KNOB Global is automatically enabled.
MIDICONTRL
Here the controller number entered in the SOFT KNOB MIDI menu is sent
regardless of what the other settings and the selected SINGLE program
may be. Comparable to a small MIDI fader box, this mode is used to con-
trol connected MIDI devices. Note that this information is not processed
internally in the Virus.
The setting for the actual SOFT KNOB mode is global. Under normal circumstances, you should set
SOFT KNOB mode to "Single" because this is the most versatile mode. When you select a SINGLE
sound whose SOFT KNOB mode is set to "Single", this setting is of course enabled. If not, Global
SOFT KNOB mode is enabled.
SOFT KNOB 1 SINGLE
This is where you enter the parameter assignment for the SOFT KNOB 1 knob. The entry is an ele-
ment of the current SINGLE PROGRAM and is stored along with it. The entry is only active when
SOFT KNOB 1 MODE is set to SINGLE. When SOFT KNOB 1 SINGLE is set to OFF, the Display
page setting SOFT KNOB 1 GLOBAL is activated.
SODT KNOB 1 GLOBAL
This is where you enter the parameter assignment for the SOFT KNOB 1 knob. The entry remains
valid regardless of the currently selected SINGLE PROGRAM. The entry is only active when SOFT
KNOB 1 MODE is set to GLOBAL or SINGLE; although in the latter case SOFT KNOB 1 SINGLE in
the current SINGLE PROGRAM must be set to OFF before the entry is activated.
VIRUS CLASSIC MANUAL
Within The Config-Menu
101