Input Select - Access VIRUS CLASSIC User Manual

Value Description
STATIC
Instead of the internal sound sources, an external signal source is routed to
the filter section. In contrast to DYNAMIC mode, in STATIC mode one or
two voices (depending on the INPUT SELECT setting, see appropriate sec-
tion) of the Virus are activated automatically without you actually playing
notes on this PART. The filters and the amplifier are switched permanently
open, the envelopes are deactivated and incoming notes are ignored. Con-
sequently you can use the filters and the amplifier as an effects section for
the input signal.
TO EFFECTS
The audio signal is routed directly to the effects section of the SINGLE pro-
gram or the PART. In this mode, the voices of the Virus are not used, which
means that polyphony remains fully intact. The filter section is unavailable
in this mode.

Input Select

Selects the external signal source for the Input Modes. The signal source that you select here is
used for both the vocoder and the ring modulator in the effects section.
Mode Description
IN L
The left channel of the external dual audio input.
IN L+R
Both channels of the external dual audio input (stereo).
IN R
The right channel of the external dual audio input.
AUX 1 L
The left channel of internal Aux 1.
AUX 1 L+R
Both channels of internal Aux 1 (stereo).
AUX 1 R
The right channel of internal Aux 1.
AUX 2 L
The left channel of internal Aux 2.
AUX 2 L+R
Both channels of internal Aux 2 (stereo).
AUX 2 R
The right channel of internal Aux 2.
VIRUS CLASSIC MANUAL
The Effects Menu
109