High Key; Hold Pedal - Access VIRUS CLASSIC User Manual

PRIORITY
This parameter lets you control how the Virus"steals notes when its polyphonic performance is
maxed out. In the first position, "LOW", the voices of all PARTs have the same priority when one
voice is switched off to accommodate a new voice. When you set the Priority of a PART to "High",
the Virus will not "steal" any notes from the voices of this PART. Use this parameter sparingly. In
other words, if you set all Parts to High, you're defeating the purpose of this parameter. In this case,
it wouldn't have any effect since the priority of all voices is the same.
KEYRANGE
In MULTI mode, you can limit the note range of individual PARTs. Use the LowKey and HighKey
parameters to define the upper and lower limits of the note range to which the PART will respond.
This lets you assign the sounds of several PARTs that are addressed by the same MIDI channel to
different keyboard zones to create what are called split sounds.
If, however, you adjust the two parameters so that the value of LowKey lies above that of HighKey,
the note range between these two high and low limits is disabled and the PART will respond only to
notes the lie above and below this zone.
LOW KEY
Determines the lowest MIDI note that the PART responds to.

HIGH KEY

Determines the highest MIDI note that the PART responds to.
MIDI VOLUME
ENABLE Switches a given PART's MIDI receive mode for MIDI Controller 7 (volume) ON and OFF.

HOLD PEDAL

ENABLE Switches a given PART's MIDI receive mode for the hold pedal (MIDI Controller #64) ON
and OFF.
VIRUS CLASSIC MANUAL 105
Within The Config-Menu