The Virus' Soft Knobs - Access VIRUS CLASSIC User Manual

In addition to the three ASSIGN options, the user interface features – as discussed earlier – a mod-
ulation destination for LFO 1 and 2 called ASSIGN. Here the same principle applies: you can select
a modulation destination and vary modulation intensity as you see fit. The only difference here is
that the modulation source, i.e. the respective LFO, is a fixed default that you can't change.
MENU
DISPLAY
You'll find a list of available sources and DESTINATIONS in the appendix.

The Virus' Soft Knobs

The Virus is equipped with two knobs that, rather than being dedicated to predefined tasks, may be
assigned to different parameters by you, the user. This option is quite handy, for it lets you control
directly the many menu parameters that do not feature a dedicated knob.
These Soft Knobs operate in three different modes:
Value Description
GLOBAL
The knob controls the parameter that you have set to Global in the
SOFT KNOB menu regardless of what the other settings and the
selected SINGLE program may be.
SINGLE
The knob controls the parameter that you have set to Single in the
SOFT KNOB menu. The setting for this parameter is stored in the SIN-
GLE program and called up whenever you select this program. If,
however, you have not selected a parameter for this program (SOFT
KNOB Single = OFF), the setting for SOFT KNOB Global is automati-
cally enabled.
EDIT > ASSIGN > SOURCE
01111111111111111112
1 ASSIGN
Source
61111111111111111154
OFF≤
VIRUS CLASSIC MANUAL
About Time ...
55