Phaser - Access VIRUS CLASSIC User Manual

INTENSITY
Controls the amount of ANALOG BOOST.
TUNE
Controls the frequency range of ANALOG BOOST.

Phaser

DIR/EFF
Controls the balance of volume levels between the direct signal and the Phaser signal: At a value of
0, only the direct signal is audible, at a value of 127, only the Phaser output signal is audible. The
values between these two extremes determine the mix of the two signals.
The pure phaser signal is generated by frequency-dependent phase shifting (PHASER Frequency)
and pitch modulation of the phaser's own LFOs (PHASER Rate and Depth). Not until the direct or
dry signal (PHASER Dir/Eff) is mixed to the wet effects signal is the typical phaser effect generated.
RATE
Determines the speed of the Phaser LFO.
DEPTH
Controls the intensity of the Phaser frequency modulation by the LFO.
FREQUENCY
The characteristic corner frequency of the phaser's all-pass filter. The frequencies of the left and
right sides are shifted every so slightly to create a real stereo effect.
114