Store To Flash - Access VIRUS CLASSIC User Manual

Store To Flash

This function allows you to write your favourite patches into the patch ROM of the Virus. The actual
process is similar to that used to update the operating system. For technical reasons, only complete
banks can be written.
The Store To Flash function can be found here: SYSTEM>STORE TO FLASH
MENU
DISPLAY
A>C, A>D, A>E, A>F, A>G, A>H and B>C, B>D, B>E, B>F, B>G, B>H indicate which RAM bank will
be written into which segment of the Virus patch ROM. A>C means, for instance, that the RAM
bank A will be written to ROM bank C. Hit the [STORE] button and confirm the safety alert message
to write the chosen bank.
01111111111111111112
New ROM-Bank?
[VAL+]«execute!
61111111111111111154
WARNING: Despite the fact that the manufacturer of the FLASH ROMs guarantee thousands
of write cycles, we recommend you use this function wisely. We took every technically possi-
ble precaution to ensure that even a power failure during the process of writing won't affect
the operating system of the Virus. In the unlikely case of permanent damage to the FLASH
ROM, the FLASH ROM has to be exchanged by an authorised Access dealer or serivice facil-
ity. This is not covered by the standard warranty.
One of the most effective ways to put your patches into the right order is to use SoundDiver Virus.
But before you start, save any precious sounds in banks A and B first! To do this, you can use
SoundDiver: Request either bank by clicking the long button 'Singles Bank A' in the Device window,
and then choose Entry>Build Library>Selected Entries. Save the library and repeat for bank B if
necessary.
Alternatively, go to SYSTEM>MIDI DUMP TX>SingleBank (A or B), set your sequencer into Record
mode, and hit the STORE button.
CONFIG -> SYSTEM -> STORE TO FLASH
01111111111111111112
1 STORE TO FLASH
61111111111111111154
A>C ≤
VIRUS CLASSIC MANUAL
All About The Memory
51