Delay - Access Virus Rack XL User Manual

84
CHAPTER 7
The Parameters
í

DELAY

The following parameters are only available
when you're working with DELAY algorithms.
DELAY RATE
Determines the speed of the Delay LFO.
01111111111111111112
1 DELAY
Rate
61111111111111111154
DELAY DEPTH
Controls the intensity of the delay modulation
by the LFO.
Like the Chorus LFO, the Delay LFO modulates
the left and right sides of the signal antiphase,
which generates a true stereo effect. Wenn das
Delay für rhythmische Effekte verwendet wird,
dann sollte die Modulationstiefe möglichst ger-
ing eingestellt werden oder auf Null gestellt
werden, da die LFO-Modulation das Timing des
Delays beeinflusst
01111111111111111112
1 DELAY
Depht
61111111111111111154
DELAY TIME
This is the absolute delay time of the delay ef-
fect in milliseconds (ms). Use it to determine the
interval between each repetition up to a maxi-
mum delay time of 693 ms. Delay time is infi-
nitely variable. Changing the delay time bends
the pitch of the delay signal. The DELAY TIME
parameter will not appear in the display when
delay time is determined by the DELAY CLOCK
(see below). If the PATTERN delay is activated,
neither the DELAY TIME nor the DELAY CLOCK
parameters are visible; in this case, the delay
times are always synced up to the global clock
generator.
01111111111111111112
61111111111111111154
5≤
If the delay time determined by the clock gener-
ator exceeds the maximum value of 693 ms,
then the delay time is automatically set to a val-
ue equivalent to half of the entered value.
DELAY FEEDBACK
Controls the amount of feedback of the Delay.
01111111111111111112
61111111111111111154
15≤
1 DELAY
Time(ms) 349.5≤
1 DELAY
Feedback 22≤