The Delay Effect - Access Virus Rack User Manual

50 CHAPTER 4
Introduction

THE DELAY EFFECT

A delay effect is traditionally used to
generated an echo of the input signal.
Locate the parameter group DELAY in
the EDIT menu.
01111111111111111112
1 DELAY
EffectSend
61111111111111111154
Here you fill find parameters that are vir-
tually identical to the parameters of the
CHORUS group. Do not allow yourself to
be confused by the slightly different ter-
minology: The delay time is set via the
parameter entitled TIME (equivalent to
DELAY in the CHORUS section); the other
features are FEEDBACK with a dedicated
LFO and the familiar parameters RATE,
DEPTH and SHAPE.
Only two functions in the Delay section
are different to the Chorus section: For
one, it features an EFFECT SEND instead
of the balance parameter DIR/EFF.
EFFECT SEND is especially significant in
MULTI MODE, where several PARTs with
different levels are patched through the
same delay effect.
For the other, LENGTH enables you to
create substantially longer delay times,
for instance to achieve complete echoes
(maximum of 693 ms) that are fully audi-
ble. The LFO allows you to modulate the
delay as you would the chorus to achieve
similar detuning effects. A stereo effect
is achieved via different modulations of
the left and right sides of the signal.
0≤