Configuring Ipv6 Mbgp Route Summarization; Advertising A Default Route To A Peer Or Peer Group - HP 6125G Configuration Manual

Step
4. Enable default route
redistribution into the IPv6
MBGP routing table.
5. Enable route redistribution
from another routing protocol.

Configuring IPv6 MBGP route summarization

To reduce the routing table size on medium and large BGP networks, you must configure route
summarization on IPv6 MBGP routers. BGP supports only manual summarization of IPv6 multicast routes.
To configure IPv6 MBGP route summarization:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP
address family view.
4. Configure manual
route summarization.

Advertising a default route to a peer or peer group

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
4. Advertise a default route to an
IPv6 MBGP peer or peer
group.
Command
default-route imported
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
Command
system-view
bgp as-number
ipv6-family multicast
aggregate ipv6-address prefix-length [ as-set |
attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name
| suppress-policy route-policy-name ]*
Command
system-view
bgp as-number
ipv6-family multicast
peer { ipv6-group-name |
ipv6-address }
default-route-advertise
[ route-policy
route-policy-name ]
349
Description
Optional.
By default, default route
redistribution is not allowed.
If the default-route imported
command is not configured, using
the import-route command cannot
redistribute any IGP default route.
Not enabled by default.
Remarks
N/A
N/A
N/A
Not configured by
default.
Remarks
N/A
N/A
N/A
Not advertised by default.
With the peer default-route-advertise
command executed, the router sends a
default route with the next hop as itself
to the specified IPv6 MBGP peer or the
specified peer group, regardless of
whether the default route is available in
the routing table.