Move Commands; Search Commands; Miscellaneous Commands - Intermec Sabre 1552 Scanner System Manual

Scanner and base station
Hide thumbs Also See for Sabre 1552 Scanner:
Table of Contents

Advertisement

Sabre 1552 Scanner and MicroBar 9745 Base Station System Manual

Move Commands

F5 Move the cursor ahead "nn" characters from current cursor position. Syntax = F5nn
F6 Move the cursor back "nn" characters from current cursor position. Syntax = F6nn
F7 Move the cursor to the beginning of the data string. Syntax = F7
EA Move the cursor to the end of the data string. Syntax = EA

Search Commands

F8 Search ahead for "xx" character from current cursor position, leaving cursor
F9 Search back for "xx" character from current cursor position, leaving cursor pointing
E6 Search ahead for the last instance of "xx" character from the current cursor position,
E7 Search back for the last instance of "xx" character from the current cursor position,

Miscellaneous Commands

FB Suppress all occurrences of up to 15 different characters, starting at the current
FC Disable suppress filter and clear all suppressed characters. Syntax = FC
EB Toggles the auxiliary port on and off. This command is used when data is normally
4-18
(nn stands for the numeric value (00-99) for the number of characters the cursor
should be moved ahead.)
(nn stands for the numeric value (00-99) for the number of characters the cursor
should be moved back.)
pointing to "xx" character. Syntax = F8xx (xx stands for the hex value for an ASCII
code. See the "Hex to ASCII Conversion Chart" earlier in this chapter.)
to "xx" character. Syntax = F9xx (xx stands for the hex value for an ASCII code.)
then increment cursor. Syntax = E6xx (xx stands for the hex value for an ASCII
code.)
then increment cursor. Syntax = E7xx (xx stands for the hex value for an ASCII
code.)
cursor position, as the cursor is advanced by other commands. When the FC
command is encountered, the suppress function is terminated. The cursor is not
moved by the FB command. Syntax = FBnnxxyy...zz where nn is a count of the
number of suppress characters in the list and xxyy...zz is the list of characters to be
suppressed. (xx stands for the hex value for an ASCII code. See the "Hex to ASCII
Conversion Chart" earlier in this chapter.)
transmitted out the main port, and needs to be temporarily sent out the auxiliary
port. The first EB in a format string opens the auxiliary port, temporarily re-
directing data transmission out the auxiliary port. Send commands (F1, F2, F3, F4)
are then used to transmit data. A second EB command closes the auxiliary port and
resumes normal data transmission through the main port. Syntax = EB

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sabre 1552 Scanner and is the answer not in the manual?

This manual is also suitable for:

Microbar 9745

Table of Contents