Intermec Sabre 1552 Scanner System Manual page 161

Symbols and Numbers
1552 Cordless Scanner, See scanner
1700 and 5900 terminals, 2-5
4683 async address selections, 3-12
9745 Base Station, See base station
A
ACK selection, host, 3-7
ACK, host, 8-11
acknowledgement from host, 1-18
acknowledgement from the base station, 1-17
adding
auxiliary data format, 3-18
CR suffix for all symbologies, 4-12
CR suffix for UPC, 4-11
data format, 4-16
prefix, 4-10, 4-13
prefix to UPC and a suffix to all symbologies, 4-12
scanner to an established work group, 4-3
suffix, 4-10, 4-13
address, Intermec, ii
AIM ID prefix
configuring, 4-8
default setting, 8-12
symbology chart, 4-9, 4-14
alphanumeric bar codes, A-3
alternate auxiliary formats, 3-24
alternate data formats, 4-21
altitude, scanner, 8-3
ambient light, 8-3
angle
pitch, 8-3
skew, 8-3
appending, Code 39, 5-7
application work group
defaults, 8-12
overview, 4-3
pitch, setting beep, 4-6
removing scanner from base station, 4-5
resetting to factory defaults, 2-18
selection, 4-4
volume, setting beep, 4-5
ASCII to hexadecimal conversion chart, 3-16, 4-15
ASCII/hex value, function code, full ASCII "CTRL" +
relationships, 6-3
associating scanner to base station, 1-10, 1-16
associating up to nine scanners, 1-11
association process, explained, 1-15
async address, IBM 4683, 3-12
attaching scanner to tool balancer, 1-7
attaching the battery pack, 1-6
Austria keyboard layout, 2-9
Automatic Caps Lock, setting, 2-10
Automatic Direct Connect mode, 2-11
Aux Data Format Editor
alternate auxiliary formats, 3-24
clearing all, 3-23
clearing one, 3-22
default settings, 8-12
defaulting, 3-22
discarding changes, 3-23
entering, 3-22
example, 3-20
miscellaneous commands, 3-21
Move commands, 3-21
saving changes, 3-23
Search commands, 3-21
selections, 3-18–3-24
Send commands, 3-20
Aux Data Formatter
requiring, 3-23
turning off, 3-23
turning on, 3-23
aux port ID transmit
default setting, 8-11
selection, 3-11
aux prefix
adding, 3-16
adding to incoming data, 3-14
clearing all aux prefixes, 3-16
default setting, 8-11
disabling, 3-17
discarding changes, 3-17
enabling, 3-17
example, adding, 3-15
saving changes, 3-17
selections, 3-14–3-18
setting to default, 3-16
aux suffix
adding, 3-17
adding to incoming data, 3-14
clearing all aux suffixes, 3-17
default setting, 8-11
disabling, 3-18
discarding changes, 3-17
enabling, 3-18
example, adding, 3-15
saving changes, 3-17
selections, 3-14–3-18
setting to default, 3-17
auxiliary data format, adding, 3-18
auxiliary port communications, 3-8–3-14
auxiliary port, default settings, 8-11
auxiliary RS-232 connector, 8-7
I
Index
I-3