Sabre 1552 Scanner Specifications - Intermec Sabre 1552 Scanner System Manual

This chapter provides product specifications and pinouts for the Cordless System. It
also provides the factory default settings.

Sabre 1552 Scanner Specifications

Parameter
Dimensions
Weight
Light Source
Print Contrast
Scan Rate
LED Indicators
Beeper
Skew Angle
Pitch Angle
Operating Voltage
Power Consumption
Ambient Light
Noise Immunity
Temperature Ranges
Humidity
Altitude
Housing Material
Sealing
Mechanical Shock
ESD Sensitivity
Specification
Height 21 cm (8.3 in) (with battery)
Width 7.8 cm (3.1 in)
Length 11.9 cm (4.7 in)
510 g (18 oz) with battery pack
630 to 660 nm Visible Red Light Emitting
Diodes (LED)
Minimum Reflective Difference = 37.5%
113 scans per second (CCD scan engine)
Two
Volume and tone programmable
± 30 degrees from perpendicular
± 7 degrees left/right from perpendicular
+4.3 to 6.0 VDC
Operating: 400 mA (maximum) @ 4.8 VDC
Standby: 12 mA
Battery Conservation Mode: 4 mA
Total darkness to 100,000 Lux (sunlight)
100 mV peak to peak
Operating: 0ºC to +50ºC (+32ºF to +122ºF)
Storage: -30ºC to +70ºC (-22ºF to +158ºF)
5 to 95% relative humidity (non-condensing)
Sea level to 3,000 m (9,900 ft)
GE Cycloloy C2800 or C2950 Standard Flow
IP 54 (Water and Dust Resistant)
26 drops from 1.8 m (6 ft) to concrete
15 kV to any external surface
Specifications and Factory Defaults
210 mA (typical) while scanning
8
8-3