Code Id Prefix; Prefix/Suffix Selections - Intermec Sabre 1552 Scanner System Manual

Code ID Prefix

This selection allows you to turn on or off the transmission of a Code ID before the
decoded symbology. (See the Symbology Chart below for the single character code that
identifies each symbology.) When you scan the On code, all current prefixes are
cleared, then a Code ID for all symbologies is programmed.
On
*Off
Symbology Chart
Symbology
Codabar
Code 39
UPC
EAN
Interleaved 2 of 5

Prefix/Suffix Selections

When a bar code is scanned, additional information is sent to the host computer along
with the bar code data. This group of bar code data and additional, user-defined data is
called a "message string." The selections in this section are used to build the user-
defined data into the message string.
Prefix and suffix characters are data characters that can be sent before and after scanned
data. You can specify if they should be sent with all symbologies, or only with specific
symbologies.
Application Work Groups Menu
AIM ID Code ID Symbology
]F0 a Code 2 of 5
]A0 b Code 11
]E0 c Code 93
]E0 d Code 128
]I0 e Matrix
Telepen
4
AIM ID Code ID
]S0 f
]H0 h
]G0 i
]C0 j
]X0 m
]B0 t
4-9