Terminal Interface Selections; Supported Terminals - Intermec Sabre 1552 Scanner System Manual

Terminal Interface Selections

If your terminal is not one of the Plug and Play options, you must program one of the
terminals listed below.
To program the terminal interface
1. Scan the Program Terminal Interface bar code.
2. Find the appropriate Terminal ID code in the table in "Supported Terminals."
3. Enter the terminal ID by scanning the numeric bar codes in the "Programming
4. Scan the Save bar code in the "Programming Chart" in Appendix A.

Supported Terminals

(Factory Default = ID 003)
Terminal
Bull
DEC
DEC
DELL
DTK
Fujitsu
IBM
IBM
IBM
IBM
IBM
3
Emulate External Keyboard and Automatic Direct Connect Mode may also need to be turned on.
Program Terminal Interface
Chart" in Appendix A.
Model(s)
BDS-7 Honeywell (HDS-7)
PC433 SE (Portable PC)
VT-220, 320, 330, 340, 420
Latitude (Portable PC)
486 SLC (Portable PC)
Stylistic (Portable PC)
PC XT
PS/2 25, 30, 77DX2
AT, PS/2 30-286, 50, 55SX, 60, 70,
70-061, 70-121, 80
AT Compatibles Keyboard Emulation
(Non-wedge)
Thinkpad 365, 755 CV (Portable PC)
Quick Start and Interface Menu
Terminal ID
035
003
004
003
003
003
001
002
003
003
003
2
3
3
3
3
3
2-7