Output Delays Selections - Intermec Sabre 1552 Scanner System Manual

Output Delays Selections

This selection provides control of the time delays between data output by the Cordless
System to the host terminal. The actual delay is 5 ms multiplied by the programmed
value (00 - 99). Default = 00.
Intercharacter Delay is the time delay between data characters output by the Cordless
System to the host terminal.
Interfunction Delay is the time delay between function (key) codes output by the
Cordless System to the host terminal.
Intermessage Delay is the time delay between data messages or records output by the
Cordless System to the host terminal.
For example, to set a 45 ms delay, scan the Intercharacter Delay bar code, scan 0, scan
9, and then scan Save (09 x 5ms = 45ms) from the "Programming Chart" in Appendix
A.
Intercharacter Delay (x5ms)
Interfunction Delay (x5ms)
Intermessage Delay (x5ms)
5
You will need to scan a two-digit number and the Save bar code after you scan this programming bar code. Refer to the
"Programming Chart" in Appendix A.
Quick Start and Interface Menu
5
5
5
2
2-13