Example 2: Add Suffix For All Symbologies; Example 3: Add Prefix For Specific Symbology/Suffix For All Symbologies; Example 4: To Clear A Specific Prefix Entry - Intermec Sabre 1552 Scanner System Manual

Sabre 1552 Scanner and MicroBar 9745 Base Station System Manual
4-12

Example 2: Add Suffix for All Symbologies

To send a CR (carriage return) suffix for all symbologies.
1. Scan Add Suffix.
2. The hex value for All Symbologies is "99." Scan 9 and 9.
3. A "CR" is equivalent to "0D." Scan 0 and D.
4. Scan Save.

Example 3: Add Prefix for Specific Symbology/Suffix for All Symbologies

To send an HT (tab) prefix for UPC only and a CR/LF (carriage return/line feed) suffix
for all symbologies.
1. Scan Add Prefix.
2. The hex value of UPC is "63." Scan 6 and 3.
3. An "HT" is equivalent to "09." Scan 0 and 9.
4. Scan Add Suffix.
5. The hex value for All Symbologies is "99." Scan 9 and 9.
6. A "CR" is equivalent to "0D" and an "LF" is "0A." Scan 0, D, 0, and A.
7. Scan Save.

Example 4: To Clear a Specific Prefix Entry

The Cordless System is programmed to send a CR/LF (carriage return/line feed) Prefix
for all symbologies (hex, 99). This is one prefix entry. You've also programmed a "#"
prefix for UPC (hex, 63).
To clear the UPC entry, but not the prefix entry for all symbologies
1. Scan the Clear Specific Prefix Prefix Selection bar code.
2. The hex value for UPC is "63." Scan 6 and 3.
3. Scan the Save Current Changes Exit Selection bar code.