Intermec Sabre 1552 Scanner System Manual page 73

Aux Format Editor Commands (continued)
Send Commands (continued)
E9 Send all but the last "nn" characters, starting from the current cursor position.
Move Commands
F5 Move the cursor ahead "nn" characters from current cursor position. Syntax = F5nn
F6 Move the cursor back "nn" characters from current cursor position. Syntax = F6nn
F7 Move the cursor to the beginning of the data string. Syntax = F7
EA Move the cursor to the end of the data string. Syntax = EA
Search Commands
F8 Search ahead for "xx" character from current cursor position, leaving cursor
F9 Search back for "xx" character from current cursor position, leaving cursor pointing
E6 Search ahead for the last instance of "xx" character from the current cursor position,
E7 Search back for the last instance of "xx" character from the current cursor position,
Miscellaneous Commands
FB Suppress all occurrences of up to 15 different characters, starting at the current
FC Disable suppress filter and clear all suppressed characters. Syntax = FC
Syntax = E9nn (nn is the numeric value (00-99) for the number of characters that
will not be sent at the end of the message.)
(nn stands for the numeric value (00-99) for the number of characters the cursor
should be moved ahead.)
(nn stands for the numeric value (00-99) for the number of characters the cursor
should be moved back.)
pointing to "xx" character. Syntax = F8xx (xx stands for the hex value for an ASCII
code, see the "Hex to ASCII Conversion Chart" earlier in this chapter.)
to "xx" character. Syntax = F9xx (xx stands for the hex value for an ASCII code.)
then increment cursor. Syntax = E6xx (xx stands for the hex value for an ASCII
code.)
then increment cursor. Syntax = E7xx (xx stands for the hex value for an ASCII
code.)
cursor position, as the cursor is advanced by other commands. When the FC
command is encountered, the suppress function is terminated. The cursor is not
moved by the FB command. Syntax = FBnnxxyy...zz where nn is a count of the
number suppress characters in the list and xxyy...zz is the list of characters to be
suppressed. (xx stands for the hex value for an ASCII code, see the "Hex to ASCII
Conversion Chart" earlier in this chapter.)
Communications Menu
3
3-21