Intermec Sabre 1552 Scanner System Manual page 162

Sabre 1552 Scanner and MicroBar 9745 Base Station System Manual
B
back view, 8-6
bar codes
alphanumeric, A-3
application work group selection, 4-4
displayed but not entered, 7-6
IBM 468X/9X Ports 5B, 9B, and 17 Interface, 2-5
incorrectly reading, 7-7
industrial interface
IBM PC, 2-4
RS-232, 2-4
wand emulation black high, 2-5
wand emulation white high, 2-6
keyboard
country selection programming, 2-9
style modifiers programming, 2-11
style selections programming, 2-10
output delays selections programming, 2-13
plug and play programming, 2-4–2-6
power settings programming, 2-16–2-17
prefix and suffix selections, 4-9–4-15
problems reading, 7-6
Program Terminal Interface, 2-7
removing scanner from base station, 4-5
sample bar code
Codabar, A-6
Code 128, A-5
Code 2 of 5, A-6
Code 39, A-5
Code 93, A-5
EAN 13, A-6
Interleaved 2 of 5, A-6
Matrix 2 of 5, A-5
UPC A, A-6
symbology chart, 4-9, 4-14
wand emulation selections programming, 2-14–2-15
See also programming bar codes
See also symbologies
Base Low Power mode
configuring, 2-16
default, 8-10
base station
acknowledgement from host, 1-18
acknowledgement to scanner, 1-17
assembly, 1-13
associating scanner to, 1-10
associating up to nine scanners, 1-11
auxiliary RS-232/wand emulation connector, 8-7
back view, 1-4, 8-6
basic operation, 1-13
housing, examining, 7-3
inspecting cords and connectors, 7-3
interface cable, replacing, 7-4
I-4
base station (continued)
keyboard wedge interface, connecting, 1-8
keyboard/terminal and RS-232 connector, 8-8
LEDs, 1-9, 1-11
Low Power mode, 2-16
maintenance, 7-3–7-5
power connector, 8-8
radius of scanner from, 1-3
reassociating scanner to, 1-10, 1-16
RS-232 interface, connecting, 1-9
scanner
moving back into range, 1-16
out of range of, 1-16
removed from network, 1-16
setting up the Cordless System, 1-8–1-10
software revision, showing, 2-19
specifications, 8-5
troubleshooting, 7-6–7-7
See also Cordless System
Battery Conservation mode, default, 8-10
battery pack
attaching to the scanner, 1-6
Battery Conservation mode, 2-16
care and handling, 7-3
charge strips, described, 1-7
charging in North America, 1-5
charging worldwide, 1-5
described, 1-7
disposing of, 1-6
LEDs, 1-6
recharging and replacing, 7-5
recommendations, 1-5
removed after association, 1-10, 1-16
specifications, 8-4
baud rate, 2-4, 3-3, 3-8, 8-11
beeps
Decode Beep Selection, 4-7
pitch, default setting, 8-12
pitch, setting, 4-6
scanner, 1-12
setting with Escape Commands, 3-7
three beeps, 1-11
two beeps and clicking, 1-10
volume, default setting, 8-12
volume, setting, 4-5
Belgium keyboard layout, 2-9
belt holster, described, 1-7
blinking LED, base station, 1-11
Block Ack/Nak protocol, 3-11
Bull BDS 7 interface keys, 6-8
Burst protocol, 3-11
C
cable, interface, replacing, 7-4
capacity, battery pack, 8-4