Word Length Data Bits Selection; Word Length Stop Bits Selection - Intermec Sabre 1552 Scanner System Manual

3
Communications Menu

Word Length Data Bits Selection

This selection sets the word length at seven or eight bits of data per character. If an
application requires only ASCII hex characters 0 through 7F decimal (text, digits, and
punctuation), select 7 data bits. If an application requires the use of the full ASCII set,
select 8 data bits per character.
7 Data Bits
*8 Data Bits

Word Length Stop Bits Selection

This selection sets the word length at one or two stop bits.
*1 Stop Bit
2 Stop Bits
3-5