Supportffdc - Brocade Communications Systems Brocade 8/12c Command Reference Manual

supportFfdc

Modifies or displays the first-fault data capture (FFDC) daemon.
Synopsis supportffdc [--disable | --enable | --show]
Description Use this command to disable or enable the FFDC events, or to display the current configuration. If
disabled, the daemon does not capture any data even when a message with FFDC attributes is
logged. FFDC is enabled by default.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
--disable
--enable
--show
When executed without operands, the command prints the usage.
Examples To display the FFDC configuration:
To enable the FFDC events:
See Also none
Fabric OS Command Reference
53-1001764-01
Disables the FFDC.
Enables the FFDC.
Displays the FFDC configuration parameters.
switch:admin> supportffdc --show
First Failure Data Capture (FFDC) is disabled.
switch:admin> supportffdc --enable
First Failure Data Capture (FFDC) is enabled.
2
supportFfdc
905