Snmp-Agent Sys-Info - HP 6125G Command Reference Manual

Description
Use snmp-agent packet response dscp to set the DSCP value for SNMP responses.
Use undo snmp-agent packet response dscp to restore the default.
The default DSCP value for SNMP responses is 0.
Examples
# Set the DSCP value to 45 for SNMP responses.
<Sysname> system-view
[Sysname] snmp-agent packet response dscp 45

snmp-agent sys-info

Syntax
snmp-agent sys-info { contact sys-contact | location sys-location | version { all | { v1 | v2c | v3 }* } }
undo snmp-agent sys-info { contact | location | version { all | { v1 | v2c | v3 }* } }
View
System view
Default level
3: Manage level
Parameters
contact sys-contact: Specifies the system contact, a string of 1 to 200 characters.
location sys-location: Specifies the system location, a string of 1 to 200 characters. This information is
stored in a management variable in the system group defined in RFC1213-MIB.
version: Specifies SNMP versions.
all: Specifies SNMPv1, SNMPv2c, and SNMPv3.
•
• v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
•
v3: Specifies SNMPv3.
•
Description
Use snmp-agent sys-info to configure system information for the SNMP agent, including the contact,
location, and SNMP versions.
Use undo snmp-agent sys-info contact and undo snmp-agent sys-info location to restore the default.
Use undo snmp-agent sys-info version to disable an SNMP version.
By default, the contact information is null, the location is null, and the version is SNMP v1 SNMP v2c
SNMP v3..
Configure the SNMP agent with the same SNMP version as the NMS for successful communications
between them.
Related commands: display snmp-agent sys-info.
Examples
# Configure the system contact as Dial System Operator at beeper # 27345.
<Sysname> system-view
74