Mirroring-Group - HP 6125G Command Reference Manual

type: remote-source
status: active
mirroring port:
GigabitEthernet1/0/14
monitor egress port: GigabitEthernet1/0/15
remote-probe VLAN: 2

mirroring-group 3:

type: remote-destination
status: active
monitor port: GigabitEthernet1/0/16
remote-probe VLAN: 3
Table 29 Command output
Field
mirroring-group
type
status
mirroring port
monitor egress port
monitor port
mirroring-group
Syntax
mirroring-group group-id { local | remote-destination | remote-source }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
View
System view
Default level
2: System level
Parameters
group-id: Specifies the number of the mirroring group to be created or removed, ranging from 1 to 4.
all: Removes all mirroring groups by using the undo command.
local: Creates a local mirroring group or removes all local mirroring groups with the undo command.
remote-destination: Creates a remote destination group or removes all remote destination groups with
the undo command.
remote-source: Creates a remote source group or removes all remote source groups with the undo
command.
Description
Use mirroring-group to create a mirroring group.
both
Description
Number of the mirroring group
Type of the mirroring group, which can be local, remote-source, or
remote-destination
Status of the mirroring group, which can be active or inactive
Source port
Egress port of a remote source group
Destination port
104