self-node: Enables IPC performance statistics for the local node.
channel channel-id: Enables IPC performance statistics for the specified channel, where channel-id
represents the channel number. The value range depends on the switch model.
Description
Use ipc performance enable to enable IPC performance statistics. Use the undo ipc performance
command to disable IPC performance statistics.
By default, IPC performance statistics is disabled.
When IPC performance statistics is disabled, the statistics data does not change. The display ipc
performance command displays the statistics collected before IPC performance statistics was disabled.
Examples
# Enable IPC performance statistics of channel 18 on node 1.
<Sysname> ipc performance enable node 1 channel 18
reset ipc performance
Syntax
reset ipc performance [ node node-id | self-node ] [ channel channel-id ]
View
User view
Default level
1: Monitor level
Parameters
node node-id: Clears the IPC performance statistics for the specified node, where node-id represents the
number of the specified node. The value is in the range of 0 to 4.
self-node: Clears the IPC performance statistics for the local node.
channel channel-id: Clears the IPC performance statistics for the specified channel, where channel-id
represents the channel number. The value range depends on the switch model.
Description
Use reset ipc performance to clear IPC performance statistics.
Examples
# Clear the IPC performance statistics of channel 18 on node 1.
<Sysname> reset ipc performance node 1 channel 18
184