HP 6125G Command Reference Manual page 123

Default level
1: Monitor level
Parameters
admin-name operation-tag: Displays history records of an NQA test group. If these two arguments are
not specified, history records of all test groups are displayed. admin-name represents the name of the
NQA test group administrator who creates the NQA operation. It is a case-insensitive string of 1 to 32
characters. operation-tag represents the test operation tag. It is a case-insensitive string of 1 to 32
characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display nqa history to display history records of the specified or all NQA test groups.
The display nqa history command cannot show you the results of voice tests and UDP jitter tests. To know
the result of a voice test or a UDP jitter test, use the display nqa result command to view the probe results
of the latest NQA test, or use the display nqa statistics command to view the statistics of NQA tests.
Examples
# Display the history records of the NQA test group in which the administrator name is administrator,
and the operation tag is test.
<Sysname> display nqa history administrator test
NQA entry (admin administrator, tag test) history record(s):
Index
10
9
8
7
6
5
4
3
2
1
Table 31 Command output
Field
Index
Response
Response Status
329 Succeeded
344 Succeeded
328 Succeeded
328 Succeeded
328 Succeeded
328 Succeeded
328 Succeeded
328 Succeeded
328 Succeeded
328 Succeeded
Description
History record number
Round-trip delay of a test packet in the case of a successful test, timeout time in
the case of timeout, or 0 in the case that a test cannot be completed (in
milliseconds)
Time
2011-01-23 20:54:26.5
2011-01-23 20:54:26.2
2011-01-23 20:54:25.8
2011-01-23 20:54:25.5
2011-01-23 20:54:25.1
2011-01-23 20:54:24.8
2011-01-23 20:54:24.5
2011-01-23 20:54:24.1
2011-01-23 20:54:23.8
2011-01-23 20:54:23.4
117