Probe Count - HP 6125G Command Reference Manual

View
FTP operation view
Default level
2: System level
Parameters
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
password: Specifies a password used to log in to the FTP server. This argument is case sensitive. If simple
is specified, it must be a string of 1 to 32 characters. If cipher is specified, it must be a ciphertext string
of 1 to 73 characters. If neither cipher nor simple is specified, you set a plaintext password string.
Description
Use password to configure a password used to log onto the FTP server.
Use undo password to remove the configured password.
By default, no password is configured for logging onto the FTP server.
The password set in either plaintext or ciphertext is saved in ciphertext in the configuration file.
Related commands: username and operation.
Examples
# Configure the password used for logging in to the FTP server as ftpuser.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password ftpuser

probe count

Syntax
probe count times
undo probe count
View
DHCP, DNS, DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter operation view
Default level
2: System level
Parameters
times: Specifies the number of probe operations per test, in the range of 1 to 15.
Description
Use probe count to configure the number of probe operations to be performed per test.
Use undo probe count to restore the default.
By default, one probe operation is performed in an NQA test.
In different test types, probe operation has the following different meanings:
140