HP 6125G Command Reference Manual page 20

reftime: 10:56:22.442 UTC Jan 7 2011(CE2686D6.71484513)
orgtime: 10:56:22.442 UTC Jan 7 2011(CE2686D6.71484513)
rcvtime: 10:56:22.442 UTC Jan 7 2011(CE2686D6.7149E881)
xmttime: 10:56:22.442 UTC Jan 7 2011(CE2686D6.71464DC2)
filter delay : 0.00
filter offset: 0.00
filter disper: 0.00
Total associations : 1
Table 4 Command output
Field
clock source
clock stratum
clock status
reference clock ID
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
Description
IP address of the clock source.
Stratum level of the clock source, which determines the clock
precision. The value ranges from 1 to 16. The clock precision
decreases from stratum 1 to stratum 16. A stratum 1 clock has the
highest precision, and a stratum 16 clock is not synchronized.
Status of the clock source corresponding to this session:
•
configured—The session was created by a configuration
command.
•
dynamic—This session is established dynamically.
•
master—The clock source is the primary reference source of the
current system.
•
selected—The clock source has survived the clock selection
algorithm.
•
candidate—The clock source is the candidate reference source.
•
sane—The clock source has passed the sane authentication.
•
insane—The clock source has failed the sane authentication.
•
valid—The clock source is valid, which means the clock source
meet the following requirements: it has passed the authentication
and is being synchronized; its stratum level is valid; and its root
delay and root dispersion values are within their ranges.
•
invalid—The clock source is invalid.
•
unsynced—The clock source has not been synchronized or the
value of the stratum level is invalid.
Reference clock ID of the clock source:
•
If the reference clock is the local clock, the value of this field is
related to the stratum level of the clock source:
When the stratum level of the clock source is 0 or 1, this field
is LOCL.
When the stratum level of the clock source has another value,
this field is the IP address of the local clock.
•
If the reference clock is the clock of another device on the
network, the value of this field is the IP address of that device.
14
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00
0.00
0.00