Snmp-Agent Usm-User V3 - HP 6125G Command Reference Manual

with the IPv6 addresses permitted in the ACL can use the specified username (community name) to
access the SNMP agent.
Description
Use snmp-agent usm-user { v1 | v2c } to add a user to an SNMPv1 or SNMPv2c group.
Use undo snmp-agent usm-user { v1 | v2c } to delete a user from an SNMPv1 or SNMPv2c group.
When you create an SNMPv1 or SNMPv2c user, the system automatically creates a read-only
community that has the same name as the SNMPv1 or SNMPv2c username. To change the access right
of this community to write access, use the snmp-agent community command or the snmp-agent group
{ v1 | v2c } command. To display the SNMPv1 and SNMPv2c communities created in this way, use the
display snmp-agent community command.
The snmp-agent usm-user { v1 | v2c } command enables managing SNMPv1 and SNMPv2c users in the
same way as managing SNMPv3 users. It does not affect the way of configuring SNMPv1 and
SNMPv2c communities on the NMS.
Related commands: snmp-agent community and snmp-agent group.
Examples
# Add the user userv2c to the SNMPv2c group readCom so an NMS can use the protocol SNMPv2c and
the read-only community name userv2c to access the SNMP agent.
<Sysname> system-view
[Sysname] snmp-agent sys-info version v2c
[Sysname] snmp-agent group v2c readCom
[Sysname] snmp-agent usm-user v2c userv2c readCom
# Add the user userv2c in the SNMPv2c group readCom so only the NMS at 1.1.1.1 can use the protocol
SNMPv2c and read-only community name userv2c to access the SNMP agent.
<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule permit source 1.1.1.1 0.0.0.0
[Sysname-acl-basic-2001] rule deny source any
[Sysname-acl-basic-2001] quit
[Sysname] snmp-agent sys-info version v2c
[Sysname] snmp-agent group v2c readCom
[Sysname] snmp-agent usm-user v2c userv2c readCom acl 2001

snmp-agent usm-user v3

Syntax
snmp-agent usm-user v3 user-name group-name [ [ cipher ] [ authentication-mode { md5 | sha }
auth-password [ privacy-mode { 3des | aes128 | des56 } priv-password ] ] [ acl acl-number | acl ipv6
ipv6-acl-number ] *
undo snmp-agent usm-user v3 user-name group-name { local | engineid engineid-string }
View
System view
Default level
3: Manage level
82