Nqa Schedule - HP 6125G Command Reference Manual

From the beginning to the end of a test, the NQA test is in test status. From the end of a test to the
beginning of the next test, the NQA test is in waiting status.
Examples
# Configure the maximum number of tests that the NQA client can simultaneously perform as 5.
<Sysname> system-view
[Sysname] nqa agent max-concurrent 5

nqa schedule

Syntax
nqa schedule admin-name operation-tag start-time { hh:mm:ss [ yyyy/mm/dd ] | now } lifetime
{ lifetime | forever }
undo nqa schedule admin-name operation-tag
View
System view
Default level
2: System level
Parameters
admin-name: Specifies the name of the NQA test group administrator who creates the NQA test
operation. The name is a case-insensitive string of 1 to 32 characters.
operation-tag: Specifies the test operation tag, a case-insensitive string of 1 to 32 characters.
start-time: Specifies the start time and date of a test group.
hh:mm:ss: Specifies the start time of a test group.
yyyy/mm/dd: Specifies the start date of a test group. The default value is the current system time, and
yyyy is in the range of 2000 to 2035.
now: Starts the tests for a test group immediately.
lifetime: Specifies the duration of the test operation.
lifetime: Specifies the duration of the test operation in seconds, in the range of 1 to 2147483647.
forever: Specifies that the tests are performed for a test group forever.
Description
Use nqa schedule to configure the test start time and test duration for a test group.
Use undo nqa schedule to stop the test for the test group.
You cannot enter test group view or operation view after a test group is scheduled.
A test group performs a test when the system time is between the start time and the end time (the start time
plus test duration). If the system time is behind the start time when you execute the nqa schedule
command, a test is started when the system time reaches the start time. If the system time is between the
start time and the end time, a test is started immediately. If the system time is ahead of the end time, no
test is started. To view the current system time, use the display clock command.
Related commands: display clock (Fundamentals Command Reference).
137