Enable Log Updown - HP 6125G Command Reference Manual

Dropped messages : 0
Overwritten messages : 0
Current messages : 9
#Jan 7 08:03:27:421 2011 Sysname IFNET/4/INTERFACE UPDOWN:
Trap 1.3.6.1.6.3.1.1.5.4<linkUp>: Interface 983041 is Up, ifAdminStatus is 1,
ifOperStatus is 1
Table 13 Command output
Field
Trapping buffer configuration and contents
Allowed max buffer size
Actual buffer size
Channel number
channel name
Dropped messages
Overwritten messages
Current messages

enable log updown

Syntax
enable log updown
undo enable log updown
View
Layer 2 Ethernet interface view, and VLAN interface view
Default level
2: System level
Parameters
None
Description
Use enable log updown to allow a port to generate link up/down logs when the port state changes.
Use undo enable log updown to disable a port from generating link up/down logs when the port state
changes.
By default, all the ports are allowed to generate port link up/down logging information when the port
state changes.
Examples
# Disable port GigabitEthernet1/0/1 from generating link up/down logs.
Description
State of the trap buffer, enabled or disabled.
Maximum capacity of the trap buffer.
Actual capacity of the trap buffer.
Channel number of the trap buffer, which defaults to 3.
Channel name of the trap buffer, which defaults to
trapbuffer.
Number of dropped messages.
Number of overwritten messages (when the buffer size is
not big enough to hold all messages, the latest messages
overwrite the old ones).
Number of current messages.
36