HP 6125G Command Reference Manual page 133

Network management and monitoring
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Max SD delay: 0
Min SD delay: 0
Number of SD delay: 0
Sum of SD delay: 0
Square sum of SD delay: 0
SD lost packet(s): 0
Lost packet(s) for unknown reason: 0
Voice scores:
Max MOS value: 4.40
Max ICPIF value: 0
Reaction statistics:
Index
Checked Element
1
ICPIF
2
MOS
Table 35 Command output
Field
No.
Destination IP address
Start time
Life time
Send operation times
Receive response times
Min/Max/Average round trip time
Square-Sum of round trip time
Packet loss in test
Failures due to timeout
Failures due to disconnect
Failures due to no connection
Failures due to sequence error
Failures due to internal error
Failures due to other errors
Packet(s) arrived late
UDP-jitter results
Voice results
RTT number
Min positive SD
Min positive DS
Max positive SD
Max positive DS
Positive SD number
Max DS delay: 0
Min DS delay: 0
Number of DS delay: 0
Sum of DS delay: 0
Square sum of DS delay: 0
DS lost packet(s): 0
Min MOS value: 4.40
Min ICPIF value: 0
Threshold Type
Checked Num
-
-
-
-
Description
Statistics group number
IP address of the destination
Time when the test group starts
Duration of the test, in seconds
Number of probe packets sent
Number of response packets received
Minimum/maximum/average round-trip time in milliseconds
Square sum of round-trip time
Average packet loss ratio
Number of timeout occurrences in a test
Number of disconnections by the peer
Number of failures to connect with the peer
Number of failures due to out-of-sequence packets
Number of failures due to internal errors
Failures due to other errors
Number of response packets received after a probe times out
UDP jitter test results, available only in UDP jitter tests
Voice test results, available only in voice tests
Number of response packets received
Minimum positive delay jitter from source to destination
Minimum positive delay jitter from destination to source
Maximum positive delay jitter from source to destination
Maximum positive delay jitter from destination to source
Number of positive delay jitters from source to destination
127
Over-threshold Num
-
-

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents