Frequency; History-Record Enable - HP 6125G Command Reference Manual

frequency

Syntax
frequency interval
undo frequency
View
Any NQA operation view
Default level
2: System level
Parameters
interval: Specifies the interval in milliseconds between two consecutive tests, in the range of 0 to
604800000. The value 0 sets the test group to perform only one test, and not to collect any statistics.
Description
Use frequency to configure the interval between two consecutive tests for a test group. When a test group
starts, it performs tests one by one at the specified interval. However, if a test is not completed when the
interval is reached, no new test starts.
Use undo frequency to restore the default.
By default, the interval between two consecutive voice tests is 60000 milliseconds, and the interval
between two consecutive tests of other types is 0 milliseconds.
Examples
# Configure the ICMP echo test group starts tests one by one at an interval of 1000 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] frequency 1000

history-record enable

Syntax
history-record enable
undo history-record enable
View
Any NQA operation view
Default level
2: System level
Parameters
None
Description
Use history-record enable to enable the saving of history records of an NQA test group.
Use undo history-record enable to disable the history records saving function.
131