HP 6125G Command Reference Manual page 99

Description
Use display rmon prialarm to display the configuration of the specified private alarm entry or all private
alarm entries.
Related commands: rmon prialarm.
Examples
# Display the configuration of all private alarm entries.
<Sysname> display rmon prialarm
PrialarmEntry 1 owned by user1 is VALID.
Samples type
Variable formula
Description
Sampling interval
Rising threshold
Falling threshold
When startup enables
This entry will exist : forever
Latest value
Table 27 Command output
Field
PrialarmEntry
owned by
VALID
Samples type
Description
Sampling interval
Rising threshold
Falling threshold
linked with event
When startup enables
This entry will exist
Latest value
: absolute
: (.1.3.6.1.2.1.16.1.1.1.6.1*100/.1.3.6.1.2.1.16.1.1.1.5.1)
: ifUtilization. GigabitEthernet1/0/1
: 10(sec)
: 80(linked with event 1)
: 5(linked with event 2)
: risingOrFallingAlarm
: 85
Description
Private alarm table entry.
Entry owner, user1 in this example.
Entry status:
•
VALID—The entry is valid.
•
UNDERCREATION—The entry is invalid.
The display rmon command can display invalid entries, but the
display current-configuration and display this commands do
not display their settings.
Sampling type, whose value can be absolute or delta.
Description of the private alarm entry.
Sampling interval, in seconds. The system performs absolute
sample or delta sample to sampling variables according to the
sampling interval.
Alarm rising threshold. An event is triggered when the sampled
value is greater than or equal to this threshold.
Alarm falling threshold. An event is triggered when the sampled
value is less than or equal to this threshold.
Event index associated with the prialarm.
How can an alarm be triggered.
Lifetime of the entry, which can be forever or span the specified
period.
Count result of the last sample.
93