HP 6125G Command Reference Manual page 39

Severity
Error
Warning
Notification
Informational
Debug
size buffersize: Specifies the number of latest log messages to be displayed, in the range of 1 to 1,024.
slot slot-number: Specifies an IRF member ID.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display logbuffer to display the state of the log buffer and the log information in the log buffer.
Without size buffersize, the command displays all log information in the log buffer.
Examples
# Display the state and log information about the log buffer.
<Sysname> display logbuffer
Logging buffer configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 512
Channel number : 4 , Channel name : logbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 127
%Jun 19 18:03:24:55 2011 Sysname IC/7/SYS_RESTART:
System restarted --
...
Table 11 Command output
Field
Logging buffer configuration and contents
Allowed max buffer size
Actual buffer size
Channel number
Value Description
3 Error condition.
4 Warning condition.
5 Normal but significant condition.
6 Informational message.
7 Debugging message.
33
Description
State of the log buffer, enabled or disabled.
Maximum number of messages that can be stored in
the log buffer.
Actual buffer size.
Channel number of the log buffer. The default channel
number is 4.
Corresponding keyword
in commands
errors
warnings
notifications
informational
debugging