Ntp Configuration Commands; Display Ntp-Service Sessions - HP 6125G Command Reference Manual

NTP configuration commands

display ntp-service sessions

Syntax
display ntp-service sessions [ verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
verbose: Displays detailed information about all NTP sessions. If you do not specify this keyword, the
command only displays brief information about the NTP sessions.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ntp-service sessions to display information about all NTP sessions.
Examples
# Display brief information about all NTP sessions.
<Sysname> display ntp-service sessions
source
********************************************************************************
[12345]127.127.1.0
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
Total associations :
Table 3 Command output
Field
source
reference stra reach poll
127.127.1.0
1
Description
IP address of the clock source.
12
now offset
3 1 64 33
delay disper
0.0 0.0 0.0