Display Snmp-Agent Usm-User - HP 6125G Command Reference Manual

Related commands: snmp-agent trap enable.
Examples
# Display the modules that can generate traps and their trap status.
<Sysname> display snmp-agent trap-list
bfd trap enable
bgp trap enable
configuration trap enable
default-route trap enable
flash trap enable
ospf trap enable
pim trap enable
standard trap enable
system trap enable
vrrp trap enable
Enable traps: 10; Disable traps: 0

display snmp-agent usm-user

Syntax
display snmp-agent usm-user [ engineid engineid | username user-name | group group-name ] * [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
engineid engineid: Displays SNMPv3 user information for the SNMP engine ID identified by engineid.
When an SNMPv3 user is created, the system records the current local SNMP entity engine ID. The user
becomes invalid when the engine ID changes and becomes valid again when the recorded engine ID is
restored.
username user-name: Displays information about an SNMPv3 user. The username is case-sensitive.
group group-name: Displays SNMPv3 user information for an SNMP group name. The group name is
case-sensitive.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display snmp-agent usm-user to display SNMPv3 user information.
63